The Dolphin Automatic Pool Cleaner is the most advanced automatic pool cleaner on the market today, and with its artificial intelligence and advanced features the cleaner has set new standards for pool cleaners.
But does this make the Dolphin Pool Cleaner difficult to use or maintain? On the contrary and this post will explain how to maintain the Dolphin Pool Cleaner.
Maintenance of Dolphin Pool Cleaner –
Dolphin Diagnostic Residential Pool cleaning robot
Before removing the Dolphin from the water, switch off the power supply. Pull the cable with a steady motion to the surface. Your Dolphin should be lifted out of the water by the handle – not by the cable. When removing the Dolphin from the water, rest the dolphin on the pools edge for a few seconds to allow the water to drain. When out of the water place the Dolphin on its side, not on its brushes and always rinse the filter bag immediately. Slide back locking plates to release bottom lid. Remove filter bag clips and remove the filter support wires. Empty the debris into a garbage can. Reverse the filter back and hose the filter down or machine wash in synthetic rinse. Always clean the filter bag before leaving it to dry. Remove cover and flaps, hose down, and reassemble. Place the clean filter bag on the support wires, make sure the label is on the outside and is placed centrally along the bottom lid. Put the bottom lid assembly back into the body, slide the locking plates under the wire clips.
Other parts that may need cleaning includes the filter screen and impeller blades. Before removing the impeller cover be sure to that the power supply is in the off position. Untwist the impeller cover, to clean around and under the impeller blades.
Don’t forget to change the diagonal position of the handle before storing the Dolphin Pool Cleaner.